Личный кабинет
Характеристики
SN74HCT574DW, ИР37The SN74HCT574DW is an octal edge-triggered D-type Flip-flop with 3-state outputs. It is designed specifically for bus driving. It is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers and working registers. The eight flip-flops enter data on the low-to-high transition of the clock input. A buffered OE input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pull-up components. OE does not affect the internal operations of the flip-flops. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.
• High-current 3-state non-inverting outputs drive bus lines directly or up to 15 LSTTL loads
• Inputs are TTL-voltage compatible
• Bus-structured pinout
• 80µA Maximum low power consumption
• 22ns Typical tpd
• ±6mA Output drive at 5V
• 1µA Maximum low input current
• Green product and no Sb/Br
Микросхемы / Логические микросхемы / Микросхемы ТТЛ (серия 74)
Корпус: 20-SOIC (0.295», 7.50mm Width), инфо: Логический элемент ТТЛ Регистр неинвертирующий 8-бит + шинный интерфейс КМОП кристалл, примечание: ИР37
Загрузка