abe5708465bdfc9c853e94e3fad5578c

Микросхема MAX542AESD+, ЦАП 16-бит Ind SO14

Поставка электронных компонентов в Санкт-Петербург

2.636,20 руб.

x 2.636,20 = 2.636,20
Сроки поставки выбранного компонента в Санкт-Петербург уточняйте у нашего менеджера
НаличиеСрок1шт10шт50шт100шт1000шт3000шт
Склад №110-12 дней2.636,20руб.2.451,67руб.2.319,86руб.2.240,77руб.2.161,68руб.2.122,14руб.
НаличиеСрок1шт10шт50шт100шт1000шт3000шт
Склад №27-10 дней2.978,91руб.2.688,92руб.2.636,20руб.2.530,75руб.2.451,67руб.2.398,94руб.
НаличиеСрок1шт10шт50шт100шт1000шт3000шт
Склад №37-10 дней3.216,16руб.2.899,82руб.2.820,73руб.2.741,65руб.2.583,48руб.2.425,30руб.
НаличиеСрок1шт10шт50шт100шт1000шт3000шт
Склад №47-10 дней3.137,08руб.2.820,73руб.2.768,01руб.2.662,56руб.2.557,11руб.2.412,12руб.
НаличиеСрок1шт10шт50шт100шт1000шт3000шт
Склад №55 дней4.481,54руб.4.033,39руб.3.954,30руб.3.796,13руб.3.664,32руб.3.347,97руб.
НаличиеСрок1шт10шт50шт100шт1000шт3000шт
Склад №66 дней4.455,18руб.4.007,02руб.3.922,67руб.3.769,77руб.3.637,96руб.3.321,61руб.

Характеристики

MAX542AESD+, ЦАП 16-бит Ind SO14The MAX542AESD+ is a +5V, serial input, voltage output 16bit digital to analogue converter (DAC) in 14 pin NSOIC package. The device operates from single +5V supply and provides 16bit performance (±1LSB INL and DNL) over temperature without any adjustments. The unbuffered output of DAC results in low supply current of 0.3mA and low offset error of 1LSB. The DAC output range is 0V to VREF and 16bit serial word is used to load data into DAC latch. The 10MHz, 3-wire serial interface is compatible with SPI/QSPI/MICROWIRE and it also interfaces directly with optocouplers for applications requiring isolation. A power-on reset circuit clears DAC output to 0V (unipolar mode) when power is initially applied. For bipolar operation, matched scaling resistors are provided in MAX542A for use with an external precision op amp (such as the MAX400) which generates a ±VREF output swing. It is used in high resolution offset and gain adjustment, automated test equipments and data acquisition systems.

• Supply voltage range from 4.75V to 5.25V
• Operating temperature range from -40°C to 85°C
• Low power of 1.5mW
• Output settling time of 1µs
• Voltage output slew rate of 25V/µs
• Reference -3dB bandwidth of 1MHz
• Power supply rejection (PSR) of ±1LSB at 4.75V